Nema 42 Stepper Motor Kit High torque 3Axis , 150mm 1.8°  4 wire leads

1. Part No.: JK110HS150-6504
2. Frame Size:  NEMA42
3. Step Angle:  1.8 degree
4. Voltage:   5.44VDC
5. Current:   6.5 A/phase
6. Resistance:   0.8Ohm/phase
7. Inductance:  15mH/phase
8. Holding torque:   230 Kg-cm  3256oz-in
9. Rotor inertia:   1090 g-cm2
10. Number of wire leads:  4
11. Weight:      8.4kg
12. Length:   150mm

3Axis Nema 42 Stepper Motor 3256 OZ-IN CNC Mill & Cutting,NEMA42  3axis stepper motor kits. 3 axis NEMA42 cnc router kits

This item includes:

       3 PCS Nema 42 Stepper Motor With 3256 OZ-In Holding Torque,

         3 PCS Stepper Motor Driver JK2M2208, 110V-220VAC, 8.0A, 200 Microstep,

         1 PC Breakout Board & 1 Parallel Cable for free offering

       The Breakout Board is offered to you for free to buy this item above, so that

        you can set this kit up, and work in better condition.

    Note: Alternating current on driver to connect the power,there is no need for any power supply to convert.

1, stepper motor

Technical Specifications

Part No.:                          JK110HS150-6504

Frame Size:                     NEMA42

Step Angle:                     1.8 degree

Voltage:                           5.44VDC

Current:                           6.5 A/phase

Resistance:                     0.8Ohm/phase

Inductance:                     15mH/phase

Holding torque:               230 Kg-cm        3256oz-in

Rotor inertia:                  1090 g-cm2

Number of wire leads:     4

Weight:                            8.4kg

Length:                           150mm

2, Stepper Motor Driver JK2M2208

The JK2M2208 is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 110V to 220VAC. It is designed for use with the 2 phase hybrid stepper motor of all kinds with 86mm to 130mm outside diameter, regulated phase current 0.8A to 8.0A. The circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly without noise and vibration. The highest micro step is 60000ppr. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, computer embroider machine, packing machine and etc.

FEATURES

High performance, low price

16 channels constant angle, constant torque micro steps, highest micro step: 40000ppr

Highest response frequency: 200Kpps

Current of winding will be reduced by approximately 50% when no step pulse command is received for 0.1 second

Opto-isolated signal I/O

Drive current is adjustable in 16 channels from 0.8A/phase to 8.0A/phase

Singl