CHANGZHOU JINGKONG MOOTOR&ELECTRIC APPLIANCE CO.,LTD
|
Place of Origin: | Zhejiang, China (Mainland) |
![]() |
|
Add to Basket | Add to My Favorites |
HiSupplier Escrow |
3 Axis stepper motors kits nema23 , 112mm 1.8 degree 3 A/phase
This item includes:
3 PCS Nema 23 Stepper Motor dual shaft with 425oz-in holding torque,
3 PCS Stepper Driver with 4.5A JK1545 replacing M542,
1 PCS Power Supply for 400W,36VDC,
1 PC DB25 Breakout Board & 1 Cable for free offering
1, Stepper Motor
Technical Specifications
Part No.: JK57HS112-3004
Frame Size: NEMA23
Step Angle: 1.8 degree
Voltage: 6.3VDC
Current: 3 A/phase
Resistance: 2.1Ohm/phase
Inductance: 9mH/phase
Holding torque: 30Kg-cm 425oz-in
Rotor inertia: 810 g-cm2
Detent torque: 0.89 kg-cm
Number of wire leads: 4
Weight: 1.55KG
Length: 112mm
2, Stepper Motor Driver with 4.5A Current, 128 Microstep
Introduction
The JK1545 is an economical microstepping driver based on patented technology of Wantai Motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique ,it can output more speed and torque from the same motor,compared with traditional drivers ,such as L/R drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple,therefore less motor heating is achieved.
Features
Low cost and good high-speed torque |
14 selectable resolutions |
Supply voltage up to +45VDC |
Suitable for-2-phase and 4-phase motors |
Output current up to 4.5A |
Dip switch current setting 8 different values< Related Search
Hybrid Stepper Motors
Hybrid Stepping Motor
Stepper Motor Hybrid
3 Phase Motor
3 Phase Asynchronous Motor
3 Phase Induction Motor
More>>
Find more related products in following catalogs on Hisupplier.comRelated Products |